I saw a link to your site from Jerry's Artarama regarding pigment and PVA. Looking forward to reading more from your site. ty
Posted by Holly Parker · via clivebryant.com · 53 months ago

As you know, I mostly paint in oils. While I adore using oils, they are notoriously slow to dry. That's fine for single session "alla prima" paintings, but can be frustrating when taking a layered approach, as I described to you last week in my painting of GS.
Whenever I intend to paint in layers, I like to get things moving quickly by starting the painting using dry pigment and PVA size. I rather glossed over this last week, so let me tell you a bit about that here.
In essence all paint is merely "coloured stuff" mixed into a liquid that dries. It's the drying liquid that differentiates between egg tempera (egg), oil paint (usually linseed oil), watercolour (gum Arabic) and acrylic (polymer). You can pretty much mix any coloured powder into a drying liquid, and you have paint.
I was taught the Pigment and Size method at Norfolk Painting School by Martin Kinnear. You take dry pigment (I usually get mine from L Cornelissen & Sons in London) and some PVA size (made by Gamblin) and mix it into a paste. It dries quickly, so you have to work fast. It creates a quick coloured start, as opposed to a more traditional monochrome grisaille underpainting where paint is thinned with turpentine (or other spirit).
Why throw colour up so fast? Because all colour is relative. I can't gauge if a colour area is right in isolation. It needs to be judged next to its neighbours and the canvas as a whole. So using pigment and size enables me to get a quick foundation established for all the layers that follow.

Last week I started a new layered portrait of my best friend's son. Here's my pigment and PVA size setup for the start of it. This is a make-shift stay-wet palette (plastic box with damp paper towels at the bottom, covered by a sheet of cooking parchment), with dry pigment around the outside.
I'm using Alizarin (hue), ultramarine, cobalt turquoise, viridian, cad yellow (hue), titanium white and ivory black. In the middle is the PVA size, in a metal egg cup that my grandmother gifted my family when I was around 12 years old. For some reason I've used it in art ever since.
PVA size dries too quickly for my liking. Lately I've been experimenting with Owatrol Floetrol to delay drying, and that seems to work well. I add around 10% into the PVA size in the egg cup and dilute it back with a touch of water because the Floetrol is a little gloopy. It keeps the mixes workable just a little longer, which I much prefer.
Pigment and PVA size may be more hassle than using tubed acrylics for an underpainting, but the surface stays more open - grainy if you will - which gives the oil paint something to key into. A mechanical bond.
When I raised this on Instagram, I thought someone would mention "covalent bonding". That's where the bonding occurs at an atomic level, such as when painting oil paint over oil paint. To the best of my knowledge, covalent bonding only occurs in like-mediums. Anything else relies on mechanical bonding. For instance, an acrylic-primed canvas has a "tooth" to it (it's "scratchy") so that oil paint can key into it.
The PVA size doesn't complete seal pigment particles. This provides a certain absorbency for the next oil-based layer to soak into, giving that good bond.
Now, I don't advocate you go out and buy pigment and size. This email is really just me expanding on the subject from last week. Although it's a slightly quirky technique, I do enjoy it and will stick with pva size for a while (bad pun - sorry!)